PS type controller(2.8A)
|
Constant voltage/ constant current device This compact sized device controls load torque of powder clutches and brakes by constant voltage, or current. |
 |
Features
| Constant voltage/ constant current
Not only between 0~24V of constant voltage, but also between 0~2.8A of constant current is possible.
| Multifunctional method by microcomputer
Inertia compensation output, and stop timer activated by outer signal is possible.
| Precise/ rough control of variable output
One-touch method
with multi turn variable resistor on panel surface, one-touch precise/ rough control becomes possible.
| 4 way switching of output
Correspond 2 external signals
3 patterns by program, and manual 4 way switching is possible.
| With load short protection circuit function
The controller is protected by protection circuit when load short.
Outer dimensions
 |
Specifications
| Type | PS-2.8A | |||
| Input voltage | AC85～265V (Free power source method) |
Output display | 00.0 (When constant voltage), 0.00(When constant current) | |
| Output voltage | DC0 ～ 24V | Error display | 0V(Excess voltage), 0C(Excess current) | |
| Output current | 0～2.8A | Structure | Steel sheet made wall mounted protection type | |
| Output fluctuation | Below0.05V, Above0.005A | Paint color | Case：Munsell5PB7/2 Panel：Black |
|
| External input | Adjustable resistor1kΩ(0.5W) DC0～10V |
Weight | Approx.1.3kg | |
| External signal | RUN/RC1, STOP/RC2signal (Pulse, continuous signal possible) |
Applicable types | POC/POB-0.3～20 PHC/PHB-0.6～20 PMC-10～40, PRB-1.2～20 PTB-2.5～20 HO/HB-0.6～10 TB-260～1525 |
|
Input/Output connection diagram
 |
